Connecting a Central Station to a Central Station

It is possible to connect a second Central Station to the first one you are using. Dazu To do this, you will need the special 60123 connecting cable (available at your authorized dealer). There are two different plugs on this cable. Plug the cable into both Central Stations at the input or output.



Input: 

Output: 

Please note: The programming track must be connected to the Central Station at which the cable connected to the Output!
You should set up one of the two units as an "auxiliary controller" in Setup under "Central Station" (the registration of mfx locomotives could otherwise be disrupted).

When a Central Station is operated as an auxiliary controller next to a Central Station, the locomotive list must be set up manually in the auxiliary controller. The list cannot be transferred from the primary controller. mfx locomotives that are registered while the auxiliary controller is connected to the first or primary Central Station are registerd in both Central Stations.

Go back to Setup/Central Station or Setup/Info

Connections of the Central Station