Please note that the correct address must be set on the decoder for the turnout.
During the configuration process for the right turnout you can read the appropriate switch settings after you have selected the corresponding group of switches (k83 decoder with 8 switches or 74460 decoder with 10 switches) and then transfer the settings to the decoder for the "Y" turnout.

The turnout can be assigned a name of your choice under "Name". The name for the turnout is displayed above the pair of buttons assigned to that turnout.

The switching duration indicates how long the switching impulse is sent (entry in milliseconds). We recommend a value between 250 and 500 for turnouts.

Here is the way you connect the k 83 turnout decoder or the 74460 installation turnout decoder to this turnout.