Please note that the correct address must be set on the decoder for the signal.
During the configuration process for the signal you can read the
appropriate switch settings after you have selected the corresponding
group of switches (k83 or k84 decoder with 8 switches) and then
transfer the settings to the signal decoder.
The signal can be assigned a name of your choice under "Name". The name for the signal is displayed above the buttons assigned to that signal.
The switching duration indicates how long the switching impulse is sent (entry in milliseconds). We recommend a value between 250 and 500 for signals.
Here is the way you connect the k 83 or k 84 signal decoder to this signal.
Go to the HP0/1/2 + SH 0/1 color light signal.