Network

Under "Network" you can do the necessary settings for operation of the Central Station in a network.

If you connect the Central Station to a network, in which a DHCP server is working, the Central Station will have a network address assigned to it when you boot it up. This is then displayed in the field "CS-IP Address".
If you connect the Central Station to a network, in which there is not a DHCP server working, the Central Station assigns itself a network address. This is then displayed in the field "CS-IP Address".

In principle, the network address can be changed manually. The change takes effect immediately. When the Central Station is started again, it will always work as described above, regardless of whether an address has been assigned manually.

The settings "Start Gateway" and "Destination Address" are necessary in order to set up the communication between the Central Station and a computer program. At this time there is still no such program available.
These settings can be obtained from the instructions for the program, when the latter becomes available.