Connections for the k83 Turnout Decoder

Please note that the correct address must be set on the turnout decoder. This address consists of a particular group of settings for the decode switches on the k83 decoder and the use of a particular output on the k83 decoder.
Four consecutive addresses can accordingly always be accessed on a k83 decoder.
During the configuration process for the double slip switch you can read the appropriate switch settings and the output to be used on the k83 decoder after you have selected the corresponding group of switches (8 switches on the k83 decoder) and then transfer the settings to the turnout decoder.

If the double slip switch setting does not correspond to the setting represented on the Central Station, then all you have to do is swap the two blue wires.

The Outputs on the k83 Decoder


The Connections for a Double Slip Switch to the k83 Decoder, here at Output 4.
In this example, the double slip switch lantern is connected in a special way.